Best answer: What is a broken out section Solidworks?

A broken-out section view cuts away a portion of an assembly in a drawing view to expose the inside. … A broken-out section is part of an existing drawing view, not a separate view. A closed profile, usually a spline, defines the broken-out section. Material is removed to a specified depth to expose inner details.

What is a broken-out section?

A broken-out section is part of an existing drawing view, that is used to remove material to a specified depth in order to expose inner details of a model. A closed profile, usually a spline, defines the broken-out section.

How do you break section view in Solidworks?

Creating a Broken-Out Section

  1. Click Broken-out Section. (Drawing toolbar), or click Insert > Drawing View > Broken-out Section. …
  2. Sketch a profile.
  3. Set options in the Section View dialog box. …
  4. Set options in the Broken-out Section PropertyManager. …
  5. Click .

How do you change a broken-out in Solidworks?

To delete or edit a broken-out section:

  1. Right-click the broken-out section in the FeatureManager design tree and select one of the following.
  2. Delete.
  3. Edit Definition. Set options in the Broken-out Section PropertyManager , then click OK .
  4. Edit Sketch. Select the sketch entity and edit it, then close the sketch.
IMPORTANT:  Your question: Can AutoCAD file be convert to SOLIDWORKS?

What is a section view in Solidworks?

Section views are created to see the internal cross section of the model or peer inside the model — without moving or hiding any geometry. Normally, we create the section view in a SOLIDWORKS 3D model with the Section Tool from the Heads up view…

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

What is full section?

Full Sections

When a cutting plane line passes entirely through an object, the resulting section is called a full section Fig. 7 illustrates a full section. It is possible to section an object whenever a closer look intentionally is desired. Here is an object sectioned from two different directions.

What is a break view?

You can use a break (or interrupted) view in a drawing. Break views make it possible to display the drawing view in a larger scale on a smaller size drawing sheet. These dimensions are only for use in the drawing document and do not appear on a printed drawing. …

What is a partial section view?

Partial section. Creates a section view that is limited by the length of the section line if the line does not span the entire view. Slice section. Shows only the faces cut by the section line.

How do I align a section line in Solidworks?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

IMPORTANT:  Frequent question: How long does it take for an architect to draw up plans?

What is a concentric mate in Solidworks?

Concentric: Places two cylindrical, spherical or conical faces of a part so that they share the same centerline. Lock: Keeps two components at the same position and orientation.

How do you do a section view?

A full section view is generated by running the cutting plane through the entire length of the object being sectioned.

  1. Click Layout tab Create View panel Section drop-down Full. …
  2. Click the view you want to use as the parent view. …
  3. Click in the drawing area to indicate the start point of the section line.

How do you section an assembly in Solidworks?

To create a section view:

  1. In a part or assembly document, click Section View. (View toolbar) or View > Display > Section View.
  2. In the Section View PropertyManager, under Section 1, set the properties.
  3. To section the model with additional planes or faces, select Section 2 and Section 3 and set the properties. …
  4. Click .