Frequent question: How do you cut parts in Solidworks?

How do you cut a half part in SolidWorks?

(Drawing toolbar) or Insert > Drawing View > Section. In the Section View PropertyManager, click Section or Half Section. You can use Tab to switch between Cutting Lines in Section or Half Section.

How do you cut a 3D object in SolidWorks?

To trim a 3D sketch:

  1. Start the 3D sketch on a 2D plane.
  2. Then do either of the following: Right-click and select 3D sketch on a plane. Double-click a plane or sketch entity. You can use any of the following trim options: Power trim. Corner. Trim away inside. Trim away outside. Trim to closest.

How do I scale a part in Solidworks?

Scaling a Part

  1. In a part document, click Scale (Features toolbar) or Insert > Features > Scale .
  2. Set options in the PropertyManager.
  3. Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do I cut part of a Solidworks assembly?

To create an assembly feature cut:

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.
IMPORTANT:  How do I make a fake schedule in Revit?

How do you cut intersecting parts in SolidWorks?

To intersect or merge bodies:

  1. With the part open, click Insert > Features > Intersect .
  2. For Solids, Surfaces, or Planes, select the bodies to intersect or merge.
  3. Select Cap planar openings on surfaces to cap flat openings in surfaces.
  4. Click Intersect. …
  5. Select regions to exclude. …
  6. Select options as required: …
  7. Click .

How do you cut edges in SolidWorks?

To create a corner-trim:

  1. Create a sheet metal part.
  2. Click Corner-Trim. (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
  3. In the Corner-Trim PropertyManager, set the following under Relief Options: Select edges for Corner edges . Click Collect all corners. Select a value for Relief Type. …
  4. Click .

Can you scale a Solidworks assembly?

To scale an entire SOLIDWORKS assembly, it is possible to scale each part independently, however this could be extremely tedious for an assembly with a large number of components. Alternatively, you can save the assembly as a multi-body part and scale this part in a single step.

How do you scale a model?

Divide the real life dimension of either length or width by that of the model. So, say the real life object had a length of 55m, and the model had a length of 50 cm, or 0.5m, then do 55/0.5. This is equal to 110.

How do I scale a drawing in Solidworks?

Scales in Drawings

  1. To set the scale of an existing drawing sheet, do one of the following: In the status bar click Sheet Scale and click a scale. …
  2. To set the scale of a drawing view, do one of the following: For existing drawing views, select a view or views, then set the Scale in the PropertyManager.
IMPORTANT:  How do I find a lost Revit file?

How do you edit a part in assembly in SolidWorks?

To edit a part while in an assembly:

  1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
  2. Make the necessary changes to the part.

How do you cut extrudes in SolidWorks?

You can also go to the toolbar and click Insert -> Cut -> Extrude to pull up the Cut-Extrude Feature menu as well. Once the Extrude menu appears on the left-hand side of your screen, it will prompt you to select a plane or sketch that will be used to create the 3D model feature.

How do I make a part from assembly sketch?

Creating a Part in an Assembly

  1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
  2. Type a name for the new part in the Save As dialog box and click Save.
  3. Select a plane or planar face (while the pointer is ). …
  4. Construct the part features, using the same techniques you use to build a part on its own.