Where is make independent in SolidWorks?

In an assembly, in the graphics area or FeatureManager design tree, right-click a component or Ctrl + select multiple components and click Make Independent . In the dialog box, click OK when asked to save the component with a new name.

How do you make part independent?

To switch between making a part instance dependent or independent, you can click mouse button 3 on the instance in the Model Tree and select Make Dependent or Make Independent from the menu that appears.

How do you make a mirror component independent in SOLIDWORKS?

Optionally, if you want to independently edit the features of the mirrored part without affecting the original part, under Link, click Break link to original part. You can also break the link to the original part later by listing the mirrored part’s external references and selecting Break All.

Where is the Mate tool in SOLIDWORKS?

To add a mate: Click Mate (Assembly toolbar), or click Insert > Mate. In the PropertyManager, under Mate Selections, select the entities that you want to mate together for Entities to Mate .

IMPORTANT:  How do I change line attributes in Autocad?

How do you save an isolated component in SOLIDWORKS?

To isolate components that share a mate, right-click the mate in the FeatureManager design tree and click Isolate. Select a component to edit and click Edit Part or Edit Assembly . Optional: Click Save as Display State to save the display characteristics to a new display state.

How do I create a virtual part in Solidworks?

To make externally saved components virtual while inserting them into an assembly:

  1. Do one of the following: …
  2. In the PropertyManager, under Options, select Make Virtual.
  3. Under Part/Assembly to Insert, select or browse to a component and click to place it in the graphics area. …
  4. Click OK.

How do you draw an independent sketch?

Copying a sketched-based feature using Paste creates an independent copy that is no longer associative with the original sketch. 1.

  1. Select a sketch-based feature to copy.
  2. Click Model > Copy.
  3. Click Model > Paste. The feature creation tool of the feature being copied opens.
  4. Select a new sketch.
  5. Click to complete the copy.

How do I mirror a component in Solidworks?

In a part, click Mirror (Features toolbar) or Insert > Pattern/Mirror > Mirror. See Mirroring Features. Create an opposite-hand version of a part. In a part, select a face or plane to mirror about, and then click Insert > Mirror Part.

How do I create a mirror configuration in Solidworks?

How to Mirror Parts in SOLIDWORKS Two Different Ways

  1. With the SOLIDWORKS part you want to mirror open, create a configuration and give it a name. …
  2. Within that configuration, select the Mirror option from the CommandManager.
  3. Select a face that will serve as the plane of symmetry for the mirror.
IMPORTANT:  What is Autodesk advanced material library?

What are mates in Solidworks?

Mates create geometric relationships between assembly components. As you add mates, you define the allowable directions of linear or rotational motion of the components. You can move a component within its degrees of freedom, visualizing the assembly’s behavior.

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. For a solid loft, the first and last profiles must be model faces or faces created by split lines, planar profiles, or surfaces. …

What is assembly solidworks?

You can build complex assemblies consisting of many components, which can be parts or other assemblies, called subassemblies. For most operations, the behavior of components is the same for both types. Adding a component to an assembly creates a link between the assembly and the component.

What is make independent solidworks?

To save one or more component instances as a new file: In an assembly, in the graphics area or FeatureManager design tree, right-click a component or Ctrl + select multiple components and click Make Independent . In the dialog box, click OK when asked to save the component with a new name.

How do you save internal parts externally in Solidworks?

You right-click a virtual component and select Save Part(in External File).

Set the following options in the dialog box, and then click OK.

  1. Save internally(inside the assembly). …
  2. Save externally (specify paths). …
  3. File Name. …
  4. Path. …
  5. Same As Assembly.

How do you un isolate a part in Solidworks?

Select the component you want to edit and click Edit Part or Edit Assembly . Optionally click Save as Display State to save the display characteristics to a new display state. When you are done working on the isolated components, click Exit Isolate on the Isolate popup toolbar and Edit Component on the CommandManager.

IMPORTANT:  How do I use the sort function in STL?