You asked: How do you change alignment in Revit?

How do I lock an alignment in Revit?

Note: Before selecting, move the cursor over the element until the part of the element to align with the reference element is highlighted. Then click it. If you want the selected elements to stay aligned with the reference element (if you later move it), click the padlock to lock the alignment.

How do you align dimensions in Revit?

Add an Aligned Dimension

  1. Click Annotate tab Dimension panel (Aligned). …
  2. On the Options Bar, for Pick, select Individual References.
  3. Place the cursor at a reference point on an element, such as a wall. …
  4. Click to specify the reference.
  5. Place the cursor on the desired location of the next reference point, and click.

How do you align a viewport in Revit?

Select a placed viewport, and on the ribbon click (Move). Snap to the crop regions or datums in the viewports and move them into alignment with the guide grid lines to specify a precise location on the sheet. No constraints will be created between the guide grid and other elements on the sheet.

IMPORTANT:  How do you change a light source in Revit?

How do you set a coordinate system in Revit?

Click on the Manage Tab > Coordinates > Specify Coordinates at a Point. Click on the model line at the known origin point. The Specify Shared Coordinate dialog will open. Enter the coordinate values, the correct datum (Elevation) and the angle to True North.

How do I move a linked model in Revit?

Relocate your model.

  1. In the ribbon, click Manage tab > Project Location panel > Position > Relocate Project option. This will move the model relative to the shared coordinate system (not the project base point).
  2. Set the model in the proper position for the x, y, and z axes by aligning the grids and levels.

How do you lock a family in Revit?

To lock a labeled dimension from the Family Types dialog:

  1. Select a dimension in the drawing area.
  2. Click Modify | Dimensions tab Properties panel (Family Types).
  3. In the Family Types dialog, in the Lock column, select the checkbox for the parameter you wish to constrain.

How do you unlock Revit models?

Select a locked form. Click Modify | Form Element tab Modify Form panel (Unlock Profiles).

How do you lock something in Revit?

Open the Revit Server Administrator. In the tree control, select the item, and click (lock). Note: If you use the command-line utility to apply a lock, the lock icon displays after a refresh operation, and information about the model in use displays in the right pane.

How do you change dimension units in Revit?

Set Project Units

  1. Click Manage tab Settings panel Project Units.
  2. In the Project Units dialog, select the discipline.
  3. Click the value in the Format column to change the display value for that unit type. …
  4. Specify Units, if necessary.
  5. For Rounding, select an appropriate value.
IMPORTANT:  Which property would you use to change the color of an SVG using CSS?

How do you change a tick in Revit?

Change the Dimension Tick Mark

  1. In the drawing area, select a dimension.
  2. On the Properties palette, click (Edit Type).
  3. In the Type Properties dialog, under Graphics, select a value for Tick Mark, and click OK.

How do you change precision in Revit?

Display and edit drawing dimension precision and tolerance

  1. Right-click the dimension, and then select Edit from the menu.
  2. In the Edit Dimension dialog box, click the Precision and Tolerance tab.
  3. In the Tolerance Method list, select the tolerance type from the list.

How do you rearrange views in Revit?

About Organizing Views

  1. Tile views, and drag tabs from one tile to another.
  2. Dock tabs in place in the drawing area.
  3. Drag a tab out of the Revit application window and move the view to another monitor.
  4. To close all views except for the active view in each tile, click Close Inactive Views .

How do you move views in Revit?

To move the Project Browser, drag the browser’s title bar within the Revit window. As you move the cursor, an outline indicates where the browser will move to, and what its shape will be. Release the mouse button to place the browser in the desired location.