Frequent question: How do you make a hexagonal nut in AutoCAD?

How do you create a thread in AutoCAD?

To Insert a Thread on a Shaft (AutoCAD Mechanical Toolset)

  1. In the Shaft Generator dialog box, select the Thread option.
  2. In the Thread Selection dialog box, select the thread type to be inserted.
  3. In the corresponding dialog box, you can specify the geometrical values for the section.

How do you use Helix in AutoCAD?


  1. Select the Helix icon under the Draw interface, as shown below: …
  2. Specify center point of the base on the viewport or drawing area of AutoCAD.
  3. Specify the base radius or diameter of the helix. …
  4. Specify the top radius or diameter. …
  5. It is shown below:
  6. For diameter, press D and enter the value of diameter.

How do you make a Content tab in AutoCAD?

Turn on the missing tabs and panels

Right-click anywhere on the ribbon and use the Show Tabs and Show Panels menus to turn on the desired tabs or panels.

Which option will you use to draw a hexagon?


  1. Explanation:
  2. Open MS Paint.
  3. There will be a box where shapes will be made on.
  4. Click on that box.
  5. Select whichever shape (Hexagon) you want to draw.
IMPORTANT:  How do I convert a PDF to a DWG editable?

How do you make a threaded hole in AutoCAD?

From the ribbon, Content tab , Holes panel, select Tapped Blind Hole. Select UNC (Regular Thread – Inch), but this time, select the Front view first. Follow the prompts to indicate the starting point, the direction, and the size of the hole. Then drag the size or type a distance, in this case, 1 unit.

How do I insert bolts in AutoCAD?

To Insert a Screw in the Front View (AutoCAD Mechanical Toolset)

  1. Click Content tab Library panel Content Libraries. …
  2. In the Content panel, locate the screw to insert. …
  3. In the Details panel, click Front View.
  4. In the drawing area, specify the insertion point for the screw.

How do you draw bolts in AutoCAD?

In the drawing area, specify the insertion point for the screw. On the command line, specify the rotation angle or press ENTER to accept the default (zero). In the Nominal Diameter dialog box, select the screw size, and then click Finish. In the drawing area, drag to size the screw and then click to set the length.

What is AutoCAD helix?

Creates a 2D spiral or 3D spring. Find. Use a helix as a sweep path for the SWEEP command to create springs, threads, and circular stairways.

What is a helix pattern?

Helix. (Science: chemistry molecular biology) a spiral structure in a macromolecule that contains a repeating pattern. A curve that lies on the surface of a cylinder or cone and cuts the element at a constant angle. A structure consisting of something wound in a continuous series of loops; a coil of rope.

IMPORTANT:  Your question: How do I change a pipe network in Civil 3D?

Does AutoCAD do nut command?

Creates a filled circle or a wide ring. A donut consists of two arc polylines that are joined end-to-end to create a circular shape. The width of the polylines is determined by the specified inside and outside diameters.