Frequent question: Where is the split tool in SolidWorks?

To split a surface, the Trimming Surface must extend past the boundaries of the surface to split. Click Split (Features toolbar) or Insert > Features > Split.

How do you split a line into two in SolidWorks?

Creating Projection Split Lines

  1. Click Split Line. (Curves toolbar) or Insert > Curve > Split Line.
  2. In the PropertyManager, under Type of Split, select Projection.
  3. Under Selections, click: A sketch for Sketch to Project . You can select multiple contours from the same sketch to split. …
  4. Click . Before. After.

How do I cut part of a SolidWorks assembly?

To create an assembly feature cut:

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

What is split line solidworks?

The Split Line. tool projects an entity (sketch, solid, surface, face, plane, or surface spline) to surfaces, or curved or planar faces. It divides a selected face into multiple separate faces. You can split curves on multiple bodies with one command.

IMPORTANT:  Is Autodesk better than Solidworks?

How does split line work in Solidworks?

Using the split lines feature, the sketch lines are projected onto the selected faces, and divide the faces into multiple regions as defined by the sketch. Once the split line is created, these selected regions can have a different appearance than the other regions, and function as a separate face.

How do you split a spline in Solidworks?

right-click on the spline and go to Split Entities. You can also add the split entities icon to your sketch toolbar by going to Tools-Customize-Sketch.

How do I shorten a part in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.

How do you subtract a part in Solidworks?

To subtract bodies:

  1. Click Combine. (Features toolbar) or Insert > Features > Combine.
  2. In the PropertyManager, under Operation Type, select Subtract.
  3. For Main Body, select the body to keep. …
  4. For Bodies to Subtract, select the bodies whose material you want to remove.
  5. Click Show Preview to preview the feature.
  6. Click .

How do you edit a part in assembly in Solidworks?

To edit a part while in an assembly:

  1. Right-click the part and select Edit Part, or click Edit Component on the Assembly toolbar. …
  2. Make the necessary changes to the part.

How do you split a drawing in Solidworks?

To split a sketch entity:

  1. In an open sketch, click Split Entities. (Sketch toolbar) or Tools > Sketch Tools > Split Entities. …
  2. Click the sketch entity at the location where you want the split to occur. The sketch entity splits into two entities, and a split point is added between the two sketch entities.
IMPORTANT:  Is Maya better than blender?

How do you cut an object in Solidworks?

Click Cut With Surface on the Features toolbar, or click Insert > Cut > With Surface. In the PropertyManager, under Surface Cut Parameters, select the surface or plane to use to cut the solid bodies. Examine the preview. If necessary, click Flip cut to reverse the direction of the cut.