How do you change solid to surface in Solidworks?

How can you create a solid body from a single fully enclosed surface body?

You can create a solid from a cavity by merging coincident surface or solid bodies in a part, and then removing the geometry defined by the bodies that enclose the cavity.

How do you turn a surface into a solid?

Another method in Home > Utility > Convert > Solid to Surface.

Solution:

  1. Select the solid object to convert.
  2. Click on the ‘Manage’ tab. The ‘Manage’ tab will only appear if a valid object is selected.
  3. In the ‘Convert’ group, select ‘To Surfaces’.

How do I change solid to solid on surface edge?

In surface command bar, click blue surf feature & select all the sketches to create surface. Now take section view, you can see it is converted into solid body too. So to continue solid features further, go into path finder, right click on the blue surf select activate body.

How do you convert solid bodies to parts in Solidworks?

Split and Save Bodies

  1. Click Split (Features toolbar) or Insert > Features > Split.
  2. In the PropertyManager, set the options. …
  3. Under Resulting Bodies, select the bodies to save under , or click Auto-assign Names. …
  4. Double-click the body name under File, type a name for the new part in the dialog box, then click Save.
IMPORTANT:  Question: How do you render without shadows in Revit?

How do I edit an imported surface in Solidworks?

Editing Imported Features

  1. In the FeatureManager design tree, right-click the feature created from the imported document, and select Edit Feature. …
  2. In the Files of type list, select the desired format.
  3. Browse to select the desired file to import. …
  4. Select the Match faces and edges check box, if desired. …
  5. Click Open.

How do I use surface in Solidworks?

You can use surfaces in the following ways:

  1. Select surface edges and vertices to use as a sweep guide curve and path.
  2. Create a solid or cut feature by thickening a surface.
  3. Extrude a solid or cut feature with the end condition Up to Surface or Offset from Surface.

How do I extract a surface in Solidworks?

To manually extract surfaces, select a sub-mesh, then select a surface type under Face Settings. When you extract surfaces, you might see salient sub-meshes (arrows), which are transitions between primary mesh regions.

How do I thicken a surface in Solidworks?

Click Thicken (Features toolbar), or click Insert > Boss/Base > Thicken. In the graphics area, select a Surface to Thicken . In the PropertyManager, under Thicken Parameters, select the side of the surface you want to thicken. When you select Thicken Both Sides , it adds the Thickness you specify to both sides.

What are surface bodies in Solidworks?

Surface body is a general term that describes connected zero-thickness geometries such as single surfaces, knit surfaces, trimmed and filleted surfaces, and so on. You can have multiple surface bodies in a single part.

How do you convert a part to assembly?

To save a part as an assembly and create instance counts from similar bodies:

  1. Click Insert > Features > Save Bodies.
  2. In the Save Bodies PropertyManager, under Create Assembly, select Derive resulting parts from similar bodies or cut list.
IMPORTANT:  How do you merge parts in Solidworks?

How do you move a body in SolidWorks?

Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy. Specify parameters to move, copy, or rotate bodies. Apply mates between bodies. Click Translate/Rotate or Constraints at the bottom of the PropertyManager (if necessary) to switch to the page you want.