How do you make a cylinder in SolidWorks?

Contents show

To Draw a 3D Cylinder: In the horizontal menu bar at the top, click the button that shows a circle. In the drawing area, click the cursor once on the origin to drawing a circle. Drag the mouse and then click to create the desired circle.

How do you make a solid cylinder in Solidworks?

Click Solids > Draw > Cylinder (or type Cylinder).
…
Creating Cylinders

  1. Click in the graphics area to specify a centerpoint or type the 3D coordinates.
  2. Click in the graphics area or type a value for radius. …
  3. – or –
  4. Enter the Diameter option, then click in the graphics area or type a value for diameter.

How do you make a shaped conical in Solidworks?

To create a cone:

  1. Click Solids > Draw > Cone (or type Cone).
  2. Set an option for the cone’s base: Center point base: Click in the graphics area to specify a center point or type the 3D coordinates. …
  3. Set the cone height: Click in the graphics area or type a value. – or –

How do you make a taper in Solidworks?

To extrude an entity with a taper angle:

  1. Click Solids > Draw > Extrude (or type Extrude).
  2. Specify the type of entities to create. Surface. …
  3. Specify the entities to extrude and press Enter.
  4. Specify the Taper angle option.
  5. Specify the taper angle and press Enter.
  6. Specify the extrusion height.
IMPORTANT:  What is finite element method in Ansys?

How do you make a sphere in Solidworks?

How to Make a Sphere in SOLIDWORKS

  1. Select a sketch plane (such as the Front Plane)
  2. Sketch a semicircle.
  3. Go to the Features tab on the CommandManager. Select “Revolve Boss/Bass”
  4. Select the line in the semicircle as the axis of revolution. Specify your revolution amount, then press the green check to generate the sphere.

Is there a hollow feature in SolidWorks?

SolidWorks shell tool is mainly used for shelling process, in which the material removed from the inner body of model by keeping small thickness and results a hollow model. Using this tool, you can make either completely closed hollowed model or one face opened type.

How do you fill a hollow part in SolidWorks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

How do you use the Flex feature in Solidworks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .
…
You can create four types of flexes:

  1. Bending.
  2. Twisting.
  3. Tapering.
  4. Stretching.