Question: Why can’t I select in AutoCAD?

There might be several causes for this: The desired objects are within a viewport on a layout and the viewport is not active. The layer of the objects are locked. The edit mode of an xref is active.

How do you select something in AutoCAD?

Select objects by clicking them or by using a window or crossing method. To specify a rectangular selection area, click and release the mouse button, move the cursor, and click again. To create a lasso selection, click, drag, and release the mouse button.

How do I turn on the selection window in AutoCAD?

To turn on/off the selection cycling from the command line:

  1. At the command prompt, enter SELECTIONCYCLING and press Enter.
  2. Enter 2 to turn on the selection cycling display window / Enter 0 to turn it off.

Why can’t I snap in AutoCAD?

Solution: Do one of the following: Turn off Snap to Grid by pressing the F9 key or setting the system variable SNAPMODE to 0 (zero). Increase the cursor aperture size by going into Options, to the Drafting tab, and moving the slider right for ‘Aperture Size’ to make it larger.

IMPORTANT:  How do I use piping in Autocad?

How do I enable select similar in AutoCAD?

To configure how Select Similar evaluates objects:

  1. Enter SELECTSIMILAR at the command-line.
  2. Choose Settings at the Select objects or [SEttings]: prompt.
  3. Choose the properties you would like the Select Similar command to evaluate, then choose OK.

Why can’t I select anything in AutoCAD?

There might be several causes for this: The desired objects are within a viewport on a layout and the viewport is not active. The layer of the objects are locked. The edit mode of an xref is active.

How do I fix selection in AutoCAD?

Solution:

  1. Click the application menu (the A in the top-left corner) and select Options.
  2. On the Selection tab, clear the Use Shift to add to selection option.
  3. Choose OK to close the Options window.

How do I select a specific line in AutoCAD?

Select objects by clicking them or by using a window or crossing method. To specify a rectangular selection area, click and release the mouse button, move the cursor, and click again. To create a lasso selection, click, drag, and release the mouse button.

Where is osnap in AutoCAD?

From the pull-down menu select Tools Drafting Settings… and when the dialogue box appears, click on the Object Snap tab to display the Object Snap settings. Check the boxes against the Center and Endpoint osnaps if they are not already selected.

How do I enable snaps in AutoCAD?

Note: Snap mode can be turned on and off with the F9 key.

To Turn On Grid Snap and Set the Snap Spacing

  1. On the Status Bar, right-click on snap mode Find and select Snap Settings.
  2. In the Drafting Settings dialog box, Snap and Grid tab, click Snap On.
  3. Under Snap Type, make sure Grid Snap and Rectangular Snap are selected.
IMPORTANT:  Frequent question: Is MicroStation better than AutoCAD?

How do I change the osnap settings in AutoCAD?

To Change Object Snap Settings (AutoCAD Mechanical Toolset)

  1. At the Command prompt, enter AMOPTIONS.
  2. In the Options dialog box, select the AM:Preferences tab.
  3. In the AM:Preferences tab, select Snap Defaults.
  4. In the Power Snap Settings dialog box, make the necessary entries and choose OK.
  5. Click OK in all dialog boxes.

How do you quick select in AutoCAD?

Use Quick Select to select objects in your AutoCAD drawing

  1. Home tab> Utilities panel>Quick Select.
  2. With no command active, right-click in the drawing area and choose Quick Select.
  3. Click the Quick Select button in the Properties palette.
  4. Type qselect on the command line.

How do I access my Matchprop settings?

In order to access the settings for MATCHPROP:

  1. Type MATCHPROP, select an object, right-click and select SETTINGS.
  2. Select an element with the desired properties.
  3. You cannot have anything selected.
  4. Type MATCHPROP, right-click and select SETTINGS.

How do I select all the same object in AutoCAD?

To Select Similar Objects

  1. Select an object that represents the category of objects you want to select.
  2. Right-click, and choose Select Similar.