Your question: What is a weak reference in Revit?

A weak reference has the lowest priority for dimensioning and snapping. When you place the family into the project and dimension to it, you may need to press Tab to select a weak reference, as any strong references highlight first.

What is a reference line in Revit?

Create a reference line that you can use when creating model geometry, or to create constraints for the geometry. In the Family Editor, you can add a reference line in any view and use the same drawing tools and techniques used when adding model lines. When you sketch a reference line, it displays as a single line.

What is the difference between reference plane and reference line in Revit?

A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

How do you name a reference plane in Revit?

Name Reference Planes

  1. In the drawing area, select a reference plane.
  2. On the Properties palette, for Name, enter a name for the reference plane. Tip: Click directly on the text label for the reference plane and type a name for the reference plane.
IMPORTANT:  How do I repair archicad?

How do you create a reference level in Revit?

In addition to creating a level for each story in a building, you can also create reference levels, such as sill level.

  1. Open the section or elevation view to add levels to.
  2. On the ribbon, click (Level). …
  3. Place the cursor in the drawing area and click. …
  4. Draw level lines by moving the cursor horizontally.

What is a reference line?

Definition of reference line

: an arbitrary fixed line (as an x-axis or a polar axis) from which coordinates of a point are computed.

What do you mean by reference plane?

In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.

What is auxiliary plane?

Auxiliary Plane The plane which we draw to get the true shape of the inclined surface ( often parallel to Principal Plane ) is an auxiliary plane. Simply, the plane other than the Principal Plane ( i.e. Horizontal Plane, Vertical Plane or Perpendicular Plane) is called Auxiliary Plane.

How do you delete a reference plane in Revit?

The only way I’ve ever been able to get rid of them in your pull-down list of work-planes is to FIND the reference plane, pick it, then delete. It will automatically disappear from the list after this procedure.

Where are reference planes in Revit?

Use the Line tool or the Pick Line tool to draw a reference plane.

  • On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
  • To draw a line: On the Draw panel, click (Line). …
  • To pick an existing line: On the Draw panel, click (Pick Lines).
IMPORTANT:  Question: Can I link PDF to Revit?

What are reference planes How many reference planes are normally used?

1.1 shows the three standard reference planes: the medial (mid-sagittal), the frontal (or coronal), and the transverse planes, all at 90 degrees to each other and usually set to meet in the center of mass of the whole body.

How do you move a reference plane in Revit?

The list includes levels, grids, and named reference planes. Pick a plane—Revit creates a plane coincident to the selected plane. Select this option and click OK. Then move the cursor over the drawing area to highlight available work planes, and click to select the desired plane.

How do I link Autocad to Revit?

Link a CAD File

  1. Open the Revit model.
  2. If you want the linked file to display only in a particular view, open that view.
  3. Click Insert tab Link panel (Link CAD).
  4. In the dialog, for Files of type, select the desired file type.
  5. Navigate to the folder that contains the file to link, and select the file.